In this article, you'll find various setups for the iD/EVO mixers that can be downloaded, and loaded into your interface.
These are all loaded by opening the iD/EVO app, then going to "file" > "open" >"open mixer configuration from file" and selecting the .XML you've downloaded.
For units with standalone state, the setup can be saved into your interface by going to the iD/EVO app then "setup" > "store standalone state".
EVO 16
EVO 16 Analogue Ins to ADAT Out 1
EVO 16 Analogue Ins to Analogue Outs
EVO 8
EVO 8 Out 1/2 to Main mix, Out 3/4 to Artist Mix
iD44 MKI/MKII
iD44 Analogue Ins to Analogue Outs
iD44 Analogue Ins to ADAT Out 1 - ADAT In 1 to Analogue Outs
iD44 Analogue Ins to ADAT Out 1
iD48
iD48 Analogue Ins to ADAT Out 1
If there are any mixer setups you'd like us to create, reach out to support@audient.com.