1. Download the iD14 Software
Head to our website for the latest version of our iD Windows Installer: audient.com/products/downloads/iD14
2. Connect iD14
Using the USB cable provided, connect iD14 to your computer’s USB port.
3. Run iD Mixer Setup
Double click on the installer to run the iD mixer setup and follow the onscreen instructions.
4. Reboot PC
Reboot your PC to make sure that all the drivers have been applied.
5. Check Connectivity
The USB status LED will illuminate as soon as iD14 has achieved stable communication and should remain solidly lit during operation of the unit until power down. To double-check the connection, go to PC sound settings by following:
PC Settings > Control Panel > Hardware and Sound > Sound
Here you can see whether iD14 is visible to the PC and you can make it the computer’s default sound device by pressing ‘Set Default’.
6. iD Icon
Once installed, the iD icon can be found in the Windows system tray (it may be in the hidden
- Double-click to open iD14 mixer window when iD14 is connected
- Right-click to quit or change sample rate and buffer size.
For mixing, buffer size of 256 should be perfect. For tracking, experiment with lower latency and buffer size values. How powerful your computer is, and how processor hungry your project is, will affect how low you can get the latency and buffer size settings before you get audio instability.