Symptom
|
Cause
|
Cure
|
MiCO will not work with my portable recorder via S/PDIF |
Tascam portable recorders do not perform with the MiCO and are not recommended. |
Suggest a different device - Edirol (R4, R44), Microtrak II, Marantz CDR-310, Sony PMC-D50 etc |
HMX engaged, channel loses signal |
Fault in power supply section to HMX |
Check feeding circuitry and replace faulty parts - service@audient.com for more info |
Gain jumping, some crackles on gain pots, odd metering in places |
Unit made to original spec prior to modifications and dual gang pot. |
Contact service@audient.com for modification to updated spec details |
Acoustic noise from power supply section with changing 48v load |
Poor 48v power supply noise rejection |
Replace capacitor and inductor by power input |
Channels with some high frequency noise on D.I input or intermitted signal |
Poor capacitor joints on PCB |
Replace CA17 and CB17 |
Noisy pots |
Failing pots |
Replace pots |
D.I signal level too hot |
Hot output from source, perhaps the user would prefer less gain in the front end |
There is a modifaction to drop the level on the D.I a further 6dB, contact service@ |
Unit makes a constant whir sound and no LED/buttons work |
Power supply failure internally |
Check DC-DC converter and replace any faulty PSU components if required |
|
|
|