V1.2.9
Changes:
- Improves ADAT clocking with external devices where SMUX flags are not set correctly
____________________________________________________________________________________
V1.2.8
Changes:
- Disabled auto-muting of DAC outputs that could cause loss of transient response
____________________________________________________________________________________
V1.2.7
Changes:
- Improved optical output timings
- Fixed front panel freezing on certain hardware configurations
- Fixed control synchronization during device startup
- Firmware update reliability changes
____________________________________________________________________________________
V1.1.6
Changes:
- Fixed an Edge-case bug that could cause the front panel of the EVO 16 to freeze and require a reboot.
____________________________________________________________________________________
V1.1.5
Changes:
- Fixed Smart gain push & hold functionality
- Fixed device boot state replacing EVO mixer settings when first connected.
- Added Line Outputs metering screen in Motion UI
- USB communication performance improvements with Evo application v4.3.10 onwards
____________________________________________________________________________________
V1.1.2
Changes:
- Fixed incorrect version numbers in "About iD" Window
____________________________________________________________________________________
V1.1.1
Changes:
- Fixed smart gain failing when phantom power is on.
____________________________________________________________________________________
V1.1.0 - Initial factory firmware release.
____________________________________________________________________________________
V0.0.10
Changes:
- Fixed limited range on meters
- New status screens (phantom, instrument, mono, dim, alt, talkback)
- New function button assignments via settings menu
- New smartgain status screen on signal detection failure
- Push & hold encoder >3 seconds shows power off screen
- Push & hold smartgain button >3 seconds arms all inputs for smartgain control
- Disallow instrument and phantom power (warning screen added)
- Speaker outputs selected by default on start-up
- Encoder click on parameter adjust screen returns to first meter screen