Windows 10, 11. macOS 12+ or later. iPad and iPhone *Class Compliant only, no iD Control app for iOS.
What is the iD2?
iD2 (formerly the iD14) -for the home producer stepping up. A 10-in / 6-out interface with two Audient Console Mic Preamps, ADAT expansion for eight more inputs, and Pro Monitor Control with two speaker outputs.
What USB connection do I need?
USB C 3.0 for ALT power and computer connection
What can the FN knob be assigned to?
Any of the monitor controls; Cut, Dim, Mono Mode, M/S Mode, Talkback, Reference Level & Monitor Correction
What is Smartgain?
Originally introduced with the EVO range of interfaces, Smartgain allows you to automatically set the gain on your mic preamps. Simply activate smart gain, perform throughout the smartgain listening process, and iD2 will automatically set your input gain.
What is RoomTune?
RoomTune is Audient’s new monitor correction system. With the optional RM1 Measurement mic, you’ve got all you need to carry out 2.0 speaker measurements of your studio. Store multiple corrections for later recall.. RoomTune measures your listening environment and creates a correction profile for your monitor outputs, which is saved to the iD2 itself. A guided setup in iD Control takes you from measuring to an active profile, and you can store up to 32 profiles. Your Main and Alt speakers can each have their own profiles.
What are Orbit, HMX, LIFT and GLOW?
Orbit is a discrete analogue circuit - a variable impedance control that physically changes how your microphone responds to the preamp, reshaping tonal character from airy and modern to weighted and vintage (Vintage, Smooth, and Punch).
HMX is a discrete analogue circuit that adds harmonic saturation through a custom MOSFET - weight for thin kicks, body for clean guitars and the low-end thickness of a classic valve console.
LIFT lifts the high frequencies with the kind of expensive sheen vocal engineers chase in the mix.
GLOW combines HMX and LIFT in a single move providing saturation for the low-mids, sheen for the highs - for a mix-ready sound the moment you hit record.
Does iD2 use the Audient Console Mic Preamp?
The iD2 uses the same discrete Class-A preamp design from the flagship ASP8024-HE console now featuring digital control, smart gain, and fully accurate recall.
Can I monitor myself via iD2?
Yes, using iD Control, take full control of your monitor mix.
Can I use both headphone outputs at once?
Yes, both headphones will output at the same time. They share one mix, and one headphone amplifier, so watch out for level imbalances if using headphones with different impedances.
What FX are available in iD2?
In addition to the fully analogue tone suite, EQ and Compression are available on all input channels, as well as comfort reverb for tracking.
Can I record the onboard DSP FX into my DAW?
Yes, you can commit the EQ & Compression by pressing the “record FX” button on any of your input channels to send processed audio into your DAW.
Can I store my speaker and headphone volume?
Yes, this can be done by setting the Reference Level and assigning it to the function button to recall on the go. You can also enable volume recall in iD Control’s settings page. This will recall the output level used in iD Control last before powering down the device. Please note this is not available in Standalone Mode.
Can I use the iD2 Standalone?
Yes, store user presets via iD control for use without a computer/mac. Use the ALT power input with any USB 3.0 Plug Socket *refer to specs here
How do I enable the instrument input?
The iD2 will detect when an instrument is connected to the JFET input and take precedence over the combi jack input. Simply connect your cable and it will automatically activate. The instrument is always sent to input 1.
How do I create a separate artist or headphone mix?
Using iD control, you can create up to 3 mixes using the Main and Cue mixes. Independent Mixes can be routed to the appropriate physical outputs using the Routing Matrix
Do the iD Control Mixer faders affect the level recorded in my DAW?
No. The Mixer faders control the monitoring path rather than the input level being sent to the DAW. You can change a performer or control-room monitoring balance without changing the level being recorded.
How do I power iD2 on and off?
Simply unplug the USB connections at the back to power off the unit. If leaving connected to your Mac/PC the unit should power off along with your computer.
Why are fewer ADAT channels available at higher sample rates?
The available ADAT channel count reduces as the sample rate increases. 8 channels per optical port at 44.1/48Khz, and 4 channels per optical port at 88.2/96Khz.
Can I add more mic inputs to the iD2 as my setup grows?
Yes. The iD2 has an optical input allowing you to expand your setup with an extra 8 channels via ADAT.
Can I bring music, game audio or a remote guest into my stream or podcast with the iD2?
Yes. The iD2 has built-in loopback, which sends a stereo mix from iD Control back to your computer as an input. Choose the Main Mix to send your mics and instruments together with computer audio, such as music, game sound or a guest on a call, or send computer audio on its own. In your streaming or recording app, select inputs 11 and 12.
Will the iD2 run from my laptop's USB port, or do I need a power adaptor?
The iD2 is bus powered, so it runs from your computer's USB port with no power adaptor needed. Power and audio travel over a single USB-C cable. If your computer's port can't supply enough power on its own, the iD2 also has a redundancy power port which can be used in case the USB port isn’t supplying enough power.
What's in the box with the iD2, and what else will I need?
You get the iD2 and a 1m USB-C to USB-C cable. You'll also need your microphones, plus headphones or studio monitors to listen back. To use RoomTune room correction, add the RM1 measurement mic, which is sold separately. The iD2 comes with a 3-year warranty.
Do I get software to start recording with the iD2?
The iD2 comes with ARC, our free creative software bundle, which you unlock when you register your interface. It gives you a DAW, plugins and sounds from partner developers, so you can start making music straight away. ARC's contents change over time, so check the ARC page for what's currently included.
Will the iD2 work with my computer, iPad or iPhone, and my recording software?
Yes. The iD2 works with Mac computers running macOS 12 or later and with Windows 10 and 11 PCs. It's class compliant, so it also works with iPad and iPhone, with no drivers to install. It works with all major DAWs, so you can keep recording in the software you already know. On Mac and Windows, iD Control lets you set up your inputs, monitoring and routing.
