To configure the following settings, you’ll need to access the iD Control app, so make sure you have registered the device on our ARC system: https://arc.audient.com/?locale=en to access the latest drivers for your system.
With the iD4+ connected, iD Control should like this, when opened for the first time:
In order to hear microphone input 1, or the guitar DI input, you’ll need to raise the fader for the ‘Mic 1’ channel. We would recommend setting this to ‘0’ as a starting point, to ensure you are sending a healthy level to the main mix:
In order to hear microphone input 2, you’ll need to raise the fader for the ‘Mic 2’ channel. We would recommend setting this to ‘0’ as a starting point, to ensure you are sending a healthy level to the main mix:
If you are using both the microphone, and guitar input at the same time, simply raise both mic faders to ‘0’ as a starting point, to hear both inputs.
The same process can be followed for microphone inputs 3 & 4.
You can then use the monitor controls on the iD4+ itself, or within iD Control, to increase your headphone volume to a comfortable level.