Audio Connections
Mic/line inputs: 2 Audient Console preamps on combi-jack connectors
Instrument input: 1 JFET input
Monitor outputs: 4 balanced TRS line outputs (Main 1–2; ALT 3–4)
Hardware inserts: 2 balanced Send/Return paths on analogue Inputs 1 and 2 (separate TRS jack sockets for each Send and Return)
Headphone output: 1 stereo output on 6.3 mm and 3.5 mm sockets
Phantom power: +48 V on mic inputs
Digital I/O and USB
Optical digital I/O: 1 input and 1 output, supporting ADAT or S/PDIF
Word clock: BNC output (accuracy ±10 ppm)
USB: USB-C computer connection for audio, control and bus power
ALT POWER: separate USB-C connection for power only
Loopback recording input: USB Inputs 11+12
Microphone Input
Maximum input level: +18 dBu
Gain range: 0 to +75 dB
Signal-to-noise ratio: 101 dB A-weighted
Equivalent input noise (EIN): −128 dB A-weighted
THD+N at 0 dBu: −99 dB (0.0011%)
Frequency response: ±0.1 dB, 10 Hz–80 kHz
Microphone input impedance: 3 kΩ
Common-mode rejection ratio (CMRR): >70 dB
Line Input
Maximum input level: +28 dBu
Gain range: −10 to +65 dB
Input impedance: 10 kΩ
THD+N at +10 dBu: −98 dB (0.0012%)
JFET Instrument Input
Maximum input level: +12 dBu
Gain range: 0 to +75 dB
Signal-to-noise ratio: 96 dB A-weighted
Input impedance: 500 kΩ
Frequency response: ±0.5 dB, 10 Hz–40 kHz
THD+N at 0 dBu: −60 dB (0.098%)
A/D Conversion
Dynamic range: 123.5 dB A-weighted
THD+N at −1 dBFS: −110 dB (0.0003%)
A/D full-scale input level: +18 dBu (0 dBFS)
Frequency response: ±0.5 dB, 10 Hz to Nyquist (half the sample rate)
Line Outputs
Maximum output level: +18 dBu (0 dBFS)
Dynamic range: 128 dB A-weighted
THD+N at −1 dBFS: −115 dB (0.00017%)
Output impedance: 470 Ω
Frequency response: ±0.5 dB, 10 Hz to Nyquist (half the sample rate)
Headphone Output
Maximum output level: +15 dBu (0 dBFS)
Dynamic range: 125 dB A-weighted
THD+N at −6 dBFS: −111 dB (0.0003%)
Frequency response: ±0.5 dB, 10 Hz to Nyquist (half the sample rate)
Output impedance: 2 Ω
Maximum headphone output power: 456 mW into 30 Ω; 434 mW into 60 Ω; 43 mW into 600 Ω
Maximum peak output voltage: 3.7 V into 30 Ω; 5.1 V into 60 Ω; 6.2 V into 600 Ω
Digital Audio
Audio conversion: 32-bit
Supported sample rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz
Performance measurements: AES-17 standard; unless otherwise stated, figures have a tolerance of ±1 dB.
Round-trip latency
DAW round-trip figures are measured at a 64-sample buffer size. Internal mixer figures describe the direct ADC-to-DAC monitoring path.
Sample rate: DAW round trip / Internal mixer
44.1 kHz: 6.500 ms / 0.536 ms
48 kHz: 6.141 ms / 0.495 ms
88.2 kHz: 4.380 ms / 0.302 ms
96 kHz: 4.266 ms / 0.276 ms
176.4 kHz: 3.266 ms / 0.109 ms
192 kHz: 3.083 ms / 0.104 ms
Actual DAW monitoring latency may vary with the computer, driver and buffer configuration.
Dimensions and Weight
Unit dimensions: 6.9 × 20 × 13 cm
Unit weight: 0.833 kg
Packaged dimensions: 11.5 × 25.6 × 18 cm
Packaged weight: 1.324 kg