Follow

Basic Setup

OSX

1. Connect iD4

Using the USB cable provided, connect iD4 to a USB port on your Mac.

2. Check Connectivity

Once connected to your computer and powered on, the green status LED on iD4 will illuminate. If at any time the status LED turns off during normal operation please check all connections and if further problems develop please contact Audient support.

3. Set iD4 as Audio Device

Select iD4 in the audio device list found in:

System Preferences > Sound > Output

You will need to check that iD4 is selected as the audio device in your chosen Digital Audio Workstation Software (DAW) as well. This setting is normally found in an Audio Settings or Preferences menu.

Windows

1. Download the iD Drivers

Head to our website for the latest version of our iD Windows Installer: audient.com/id4-downloads

2. Connect iD4

Using the USB cable provided, connect iD4 to your computer’s USB port.

3. Run iD Driver Setup

Double click on the installer to run the ID mixer setup and follow the onscreen instructions.

4. Reboot PC

Reboot your PC to make sure that all the drivers have been applied. If at any time the status LED turns off during normal operation please check all connections and if further problems develop, please contact Audient Support.

6. Set iD4 as Audio Device

To set iD4 as your PC’s default audio device, select the “Set Default” option for iD4 in the window at:

PC Settings > Control Panel > Hardware and Sound > Sound

(On Windows 10 - search for Sound)

You will need to check that iD4 is selected as the audio device in your chosen DAW as well. This setting is normally found in an Audio Settings or Preferences menu.

iOS

A driver is not needed for iOS operation, however a powered USB hub must be used (as an iPad or iPhone cannot power iD4), along with a “Camera Adapter” cable, which can be purchased from Apple directly or other third party manufacturers. Other devices such as MIDI keyboards may be plugged into the USB hub along with iD4, giving you even more functionality.

1. Connect iD4 to hub

Using the USB cable provided, connect iD4 to a USB port on the powered USB hub.

2. Connect to iOS Device

Plug the USB hub into the USB port on the Camera Adapter kit, and connect the kit to your iOS device (to charge the iOS device, you can plug a charging cable into a port on the USB hub

and camera kit as well).

3. Check Connectivity

Once connected to your iOS device, and powered on, the green status LED on iD4 will illuminate.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk