ASP008 Output Information
Analogue Outputs
- 8 analogue outputs on DB25
- DB25 standard Tascam pinout format (See User Manual for diagram - Page 7)
- +27.5dBu maximum level
- Fully Balanced
Digital Outputs
Two optional digital interface cards are available for the ASP008, either one can be factory retrofitted to all units.
AES or S/PDIF
- 9-pin (DB9) DSUB connector (See User Manual for pinout diagram - Page 8)
- 8 channels of AES or S/PDIF digital output
ADAT SMUX
- For <48kHz operation, a single optical cable is connected to either optical ADAT port (provides 8 channels @ 48kHz)
- For >48kHz operation, two optical cables should be used (4ch on each for full 8ch operation @ 96kHz)