The 15 and 16 channels of the EVO 16 are loop back channels meaning you can loop back your computer audio for recording or streaming.
If you want to use all of the channels as preamps, you will need to follow the steps below to set that up.
Please be aware this is only a temporary fix, as we are working hard to get a software update out that allows these to be selected directly.
First please open up the EVO mixer, from here you will need to set your loopback source to an unused Cue mix, in this example we will use A.
Now open up Cue A and pull up the faders exclusively for digi 15 and 16, also ensure they are panned hard left and right as in the image below. Ensure you do not pull up any faders as this will also be recorded.
Now you have set that up, these channels will still be called loopback channels, but will be preamps 15 and 16 via the ADAT connection on the back of the unit.
If you need further help, please contact our help desk who will be happy to assist.