Follow

INFO - DB25 Pinout

All of the connectors on the ASP8024 follow the TASCAM standard DB25 pin out. This standard is as follows:

 

Signal Number +VE Signal -VE Signal Screen
1 / 9 / 17 24 12 25
2 / 10 / 18 10 23 11
3 / 11 / 19 21 9 22
4 / 12 / 20 7 20 8
5 / 13 / 21 18 6 19
6 / 14 / 22 4 17 5
7 / 15 / 23 15 3 16
8 / 16 / 24 1 14 2

 

Note: All Undesignated pins are unconnected. All screen connections are joined inside the console and connected to metalwork earth.

Patchbays: Tie lines connections 25-32 etc follow the same wiring convention shown above.

 

If you have any questions, please do not hesitate to contact support@audient.com

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk