FAQ - My Microphones Are Not Producing Signal With My ASP800?

My microphones are not producing any signal?

  • Double check that phantom power is turned on via the front panel switch if you are using a microphone that requires it.
  • If using channels 1 or 2, make sure that there is no jack plugged into the DI input at the front of the unit as this bypasses the mic preamp to allow the DI input.
  • Try swapping XLR cables.
  • Double check all connections to the interface or recorder.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk