Follow

FAQ - How to activate Phantom Power on the ASP4816 Talkback Mic

To turn on phantom power on the ASP4816 requires some taking apart of the console first. You need to open up the main panel to allow access to the meter bridge, then it is a case of soldering a wire to link 48V.

To start you need to watch the following parts of the video which illustrates how to open up the console:

  • 0s - 2m 40s
  • 5m 57s - 6m 51s

NOTE: The whole module does NOT need to be removed to carry out this process.

ASP4816 Service Access Video

Once you have access to the meter bridge circuit boards, a wire needs to be soldered across "LK1" on the 10800-1 board.

  

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk